If your door isn’t working properly, it can be a real pain. Not only can it be difficult to open and close, but it can also be a security risk. Fortunately, there are some easy things you can do to keep your door in good working order. Here are some door repair tips every homeowner should know.
Check the hinges
If your door is sagging or sticking, the problem may be with the hinges. Inspect them to see if they’re loose or damaged. If the problem is with a loose hinge, simply tighten the screws. If the hinge is damaged, you may need to replace it.
Adjust the strike plate
If your door isn’t latching properly, the strike plate may be the culprit. The strike plate is the metal plate that the latch bolt fits into when the door is closed. If it’s misaligned, the door won’t close properly. To fix this, simply loosen the screws, adjust the strike plate, and then retighten the screws.
Lubricate the lock
If your door lock is sticking, it may just need to be lubricated. Use a WD-40 or similar product to lubricate the keyhole and the bolt.
Replace the weather stripping
If your door is letting in drafts, the weather stripping may be worn out. Weather stripping is the rubber or foam seal that goes around the door. Over time, it can degrade, allowing air to leak through. To fix this, simply remove the old weather stripping and install new stripping.
Fix a sagging door
If your door is sagging, it’s likely because the screws in the hinges are loose. To fix this, simply tighten the screws. If the screws are stripped, you may need to replace them.
Fix a door that slams shut
If your door slams shut, it’s likely because the door closer is too tight. The door closer is a spring-loaded device that pulls the door closed. To fix this, simply adjust the tension on the door closer.
Get professional help
If you’ve tried all of these tips and your door still isn’t working properly, it’s time to call a professional. A local handyman in Red Bank door repair specialist will be able to diagnose the problem and make the necessary repairs.